Injection Transparent Plastic Molded Boxes For Heavy Load Packing 115 x 85 x 90 mm
Environment friendly injection molding boxes for packing which are made from PP material and with high tensile strength for heavy load purpose . PP injection molding boxes are designed in rectangle shape and a strengthen rib in centre each side that enhance box to support heavy load .
The cap of box is separated , a block with scale on top surface is easy for read and a strengthening purpose as well . the lip of box is higher than centre area , this design makes boxes can be stacked steadily layer by layer .
In order to moving , plastic injection molding boxes have a laptop that placed both sides .
Key Features for Plastic Injection Molding Boxes
Quite strong material
Easy operation
Portable design
Big volume capacity
Enhanced ribs
Specifications for Plastic Injection Molding Boxes
| Model |
Length |
Wide |
Height |
| PPBX101 |
115 |
85 |
90 |
| PPBX102 |
110 |
90 |
100 |
| PPBX103 |
120 |
110 |
100 |
Unit : mm
Thermal Performance for Plastic Injection Molding Boxes
| Heat conduction 10-4cm |
3 |
| Heat distortion temperature ℃ |
94 |
| coefficient of linear expansion k |
0.00011 |
| Normal working temperature ℃ |
15～60 |
| Brittle temperature ℃ |
-35℃ |
| Melting temperature ℃ |
170 |
| Pyrogenic decomposition temperature ℃ |
350 |
Mechanical Property for Plastic Injection Molding Boxes
| Tensile strength MPa |
30 |
| Elongation at break % |
200 |
| Bending strength MPa |
42～56 |
| Modulus of elasticity for bending MPa |
2000 |
| Notched Impact Strength MPa(kgf/mm) |
35 |
| Hardness HR |
80～110 |
| Modulus of elasticity for tension MPa |
1500 |
Special Characteristics for Plastic Injection Molding Boxes
- Small density with light weight
- Resistant impact
- Resistant heat
Continuous working temperature can be 110 -120℃ and will not deformed even temperature is up to 150℃ .
PP parts are water proof and not effect with the most chemicals
- Pure material with non-toxic
- Perfect insulation
- Hard surface and anti-scratching
PP parts with high crystallinity
Tips for use
PP injection molding box parts are not suitable for quite low temperature that below -30℃ .
PP injection molding box parts are easy to be aged as light , heat and oxygen .
PP injection molding box parts with high static
Product Tags:
|
|
Injection Transparent Plastic Molded Boxes For Heavy Load Packing 115 x 85 x 90 mm Images
|
